PROBLEM: Printer Reads LOW INK LEVEL

CAUSE:
1. Printer is reading number of pages this cartridge has ever printed.  There is no way to reset certain cartridges back to zero pages printed.  Like buying a used car with a new engine, the odometer can not be reset to zero miles.  Even if the printer indicated low or empty ink be assured that the cartridge you purchased is filled to or past OEM capacity.

 

Dell All-In-One Printer Low Ink By-Pass Instructions

 

Instructions for installing SwapInk remanufactured inkjet black & color cartridges for the (Series 5, 7, 9) M4640, M4646..

 

 

Dell's software will improperly read the ink level for your new remanufactured ink cartridge. The ink level may read as empty, or be less than 100% filled with ink.  Your cartridge is filled with the exact same milliliters (ml) of ink as the genuine Dell cartridges, and will function normally with your printer See the instructions below to reset the printer chip for your new cartridge.

 

 

 

If you receive this page, DO NOT check the 'Complete-A-Print' box. If it is already checked, please uncheck it. This will avoid additional warnings regarding your remanufactured cartridges. In no way does this harm your printer or reduce the quality of your printer. You can always check this box at a later time.

 

 

 

 

As noted above, when receiving this page, also make sure that the 'Complete-A-Print' box is UNCHECKED. You may also check the 'Don't display this dialog again' to avoid this warning in the future.

 

 

Once completed, your ink cartridge is installed. The printer should be able to read the ink level of the cartridge the next time you open the printer status bar, or on the next restart of your computer.